Tag: Lego

Making in miniature

This week at Michigan Makers saw the junk box and 3D printer still going strong! We also brought back many of the same things from the past few weeks, including littleBits, Hour of Code, Lego, and Kinex. We also brought back the Dash robots as well as the tiny Ozobot, which follows the path you draw for it and changes the color of its lights accordingly.

We finally were able to draw a path for the Ozobot

We discovered through experimentation that drawing a path for the Ozobot takes some serious pigmentation, and also that it works best when the turns are gently curved instead of right angles.

Tiny table for some tiny Shopkins!

The junk box was as popular as ever, especially for making miniatures like the tiny table for Shopkins above, and an equally tiny teacup.

Hour of Code has become a real hit with some of the kids

Hour of Code has remained a hit with a lot of the kids, some of whom have spent the majority of the last two weeks on the Blockly-based coding activities. One student told me he can’t wait to keep practicing at home and show his mom what he has been up to!

Prying off 3D prints is harder than you would think

Last but certainly not least, we have been making progress ensuring that every student who wants to print something using the 3D printer has their chance. We have been consistently impressed with how careful the students are around the printer!

One more week to go, Makers!

Costumes and Coding

The 3D printer is back! And so was the junk box, with even more fresh supplies than last week.

Tulle makes for great costumes

Did I mention that among the junk box supplies was a huge pile of tulle? Between that and the Hawaiian leis and some discarded Valentine’s Day garland, there were some truly inspired costuming creations this week.

Getting the headband just right

Popular choices were headbands, crowns, and other more elaborate headdresses, but we also had belts and what I can only describe as an improvised chest-plate made from what may once have been a woven straw trivet.

littleBits Korg kits (and coding in the background!)

I was pleased to see more interest in the littleBits kits this week, and since we were 3D printing, we had some kids ask to do Hour of Code or Build with Chrome. It’s always a little bit heartwarming to have kids asking you if they are allowed to practice computer coding.

3D design using Cookie Caster

The 3D printer was back and loaded with some gold-colored filament this week. We had some really intricate 3D creations printed this week using Cookie Caster (Kristin and I didn’t even know it was possible to make such detailed creations using that program)!

See you again next week, Makers!

Mitchell’s Budding 3D Designers

After last week’s successful debut of the 3D printer, we couldn’t wait to have the kids experiment with creating their own designs. We decided to try using CookieCaster.com, a website from MakerBot which allows you to draw an outline of an object using a line tool or upload and trace images, which the website automatically extrudes into 3D printed objects that are just like a cookie cutter!

Designing 3D prints using CookieCaster

We had a little bit of a hiccup getting the website to work initially, so not everyone ended up designing something today. But, we will definitely be bringing this back in future weeks so everyone can have a chance to design and 3D print an object.

3D printed house, designed using CookieCaster

It was great to see what the kids came up with. CookieCaster forced them to think very carefully about what they were going to make, since they could only use lines and had to make sure the lines connected to make an outline. Some kids said it was too hard at first – but they focused, perservered, and created some amazing stuff, like a heart, a panther, and a house.

Sweet Two-Story House Built with Roominate

This week we also finally had some girls who were able to figure out the electronic components of Roominate, which they added to the creation above. Check out a video demonstration on our Flickr!.

Hour of Code – Check out that focus!

And after an exhasting day of 3D printing, what’s a maker to do? Relax with some Hour of Code, of course.

Can’t wait to see what these kids come up with next!

3D Printer Debut at Mitchell

We had quite the menu of options this week at Mitchell!

Along with the regular offerings of Lego, Kinex, Tinker Toys, and the junk box, we also brought back the Dash robots, Roominate, the Design Studio game, and Snap Circuits as well.

Powering a fan with Snap Circuits.

And, for the fans of Snap Circuits, we also brought a few littleBits kits this week. These kits include modules that snap together and allow kids (and adults!) to build a variety of projects as they learn about inputs, outputs, and circuits.

Trying out the littleBits Space Kit.

However, the most exciting activity this week was the debut of the 3D printer!

3D Printing the Michigan “M.”

Kristin and I have seen the 3D printer operate a fair number of times, but watching the kids become entranced by the printing reminded us of how cool this technology really is to watch. Some kids spent the whole day today just watching the printer chug along!

Lego Nyan cat meets junk box UFO.

We are really looking forward to future weeks, and hoping we can give everyone the opportunity to create something of their own using the 3D printer.

 

Robots & Roominate

Another successful week of Michigan Makers!

New today were our always popular Dash robots, a design and prototyping game called Design Studio, as well as Roominate, a building set which also lets you set up lights and motors to control different aspects of your creation. We also brought some new Snap Circuits kits since that was such a popular activity last week.

Design Thinking with The Extraordinaires’ Design Studio

The junk box, Lego, Kinex, and Tinker Toys made a reappearance to round out today’s menu. And this week, we had two more family members volunteer, which made a huge difference for Kristin and me!

Building with Roominate

A few girls were the first to explore using our Roominate kit and were able to create a two-story house which they were working on furnishing and decorating, as well as exploring using some of the electronic components.

As usual, we had a flurry of interest in Dash and were glad that the kids were able to negotiate turns with each other so everyone who wanted to experience the robots today was able to have a chance.

Snap Circuits was a success again this week, with two girls creating a project that let them recharge a battery by winding a crank and regulating the voltage output.

The best part (for Kristin and I) was how well the kids cleaned up – they even cleaned up early, without being asked! We suspect this may be due to the positive influence of our excellent volunteers.

Keep tuned for future weeks – the 3D printer might even make an appearance at Mitchell one of these days!

 

Welcome Back Michigan Makers!

Hi everyone! Kristin and I were very excited to start up Michigan Makers again, with lots of new faces, and a few of the same.

Tech Box Tricks

Tech Box Tricks made another appearance today, along with Snap Circuits, which were a newcomer this year. Snap Circuits come with a board and different circuit components which can snap together, helping to teach kids about how circuits work as they create a variety of cool projects exploring light, sound, and motion. We were also very fortunate to have a parent volunteer this week who helped to man this activity!

Snap Circuits

We also brought the ever-popular junk box as well as Kinex, Tinker Toys, Lego, and even the old classic –  Lincoln Logs.

And what a successful first day back it was! We were very impressed by the enthusiasm and creativity of the group. There was a lot of creative use of materials in from the junk box, and some of the kids spent the whole time crafting their creations, despite having to share a single roll of tape after we ran out.

Some of the projects from today included a mask, a bird with flexible wings, a miniature table with dishes, and a golden snitch.

I know I can’t wait to see what this group will come up with in future weeks!

Build it and “Trick” it out

This week, we tinkered with Legos and TechBox Tricks. Legos have been a favorite here at Michigan Makers, and our students immediately took to them, building everything from fortresses to landscapes. We were excited to bring along the TechBox tricks this week because they could easily be incorporated into just about anything you make, especially with Legos.

 

From the TechBox website:

“TechBox is a series of electronics modular kits for DIY enthusiasts, electronic beginners and educators. With the plug and make feature, the entry level TechBox Tricks sets you to a good start on a journey of creation without any requirement of programming knowledge.”

 

With the help of a 9V battery energy source, students constructed simple circuits by combining an input (such a light sensor or a switch) with an output (buzzer, spinning motor, or LED). We found students placing motors into their Lego structures, making conveyor belts and door alarms. One student even said that she would use the TechBox kit to create an alarm that would go off if it detected someone getting too close to her piggy bank. We get so excited when they think about how they could apply these concepts and ideas in their everyday lives!

BACK FROM BREAK!

This week was our first class after University of Michigan’s winter break. It was a little tough for everyone to stay focused, and two adults were absent due to illness. Because we didn’t get to go to Mitchell last week, we gave all of the students bags of materials to make things for this class. Most students made all kinds of cool things, but forgot to bring them in today (but said they’d bring them next week). Some students forgot to make things, but said they will when they get a chance. The students that did bring in their creations got to show them during our closing meeting.

PictureHere Miles is showing his six-wheeled car that transforms into a flying contraption. He also made a penguin.

You might notice that many students are wearing necklaces here. That’s because Kristin, the woman in charge of Michigan Makers went to Hawaii and brought back Kukui nut necklaces. Before electricity, Hawaiians would burn the nuts for light. These days, the Kukui nut is a sign of knowledge. We had some guests today, and so students could wear Kukui necklaces to show that they were okay with being asked questions. The guests from Hillel Day School enjoyed seeing how students explore and work in Michigan Makers.

The activities for today were stop-motion animation, making things with materials from the scrapbox, snap circuits, name stickers, choose your own adventure story-writing (or just creative writing), using the sewing machine to make a pull-tie bag, being the reporter, and building with Legos.

Images © 2015 Regents of the University of Michigan. Text available under Creative Commons Attribution-NonCommercial-ShareAlike license unless otherwise stated. This project was made possible in part by the Institute of​ ​Museum and Library Services RE-05-15-0021-15.