Tag: rubber bands

Last Makers Session of the Year at Scarlett! :'(

How did an entire school year just fly by? Because a majority of the Mentors will be graduating in a few short weeks, this week marked the last Michigan Makers session until we return in the fall! We had a full range of STEAM activities for our students to dive into: resistance dying, LittleBits, Rainbow Looms, Legos, and TechBox Tricks. There’s something for everyone!

20160414_155909

 

I was inspired by this simple yet cool idea for using rubber bands, paper, and cardboard (which we had lying around and went unused by our students for some time):  https://babbledabbledo.com/easy-art-projects-for-kids-rubber-band-art/

Easy-Art-for-Kids-Rubber-Band-Art-BABBLE-DABBLE-DO-hero-9

Can you believe that with a little bit of water color, you can make that? We brought this idea to our students, and they all went for it! You could hear a lot of, “Hey, how did you do that?” and, “How did you make that effect?” going around among students. Our Makers were more than happy to share with their peers how they made a certain effect and to share tips on how to make the rubber band lines more distinct (TIP: Gently dab the water color onto the paper, no wiping!).

20160414_154039

20160414_155824

One of our students admitted that she’s terrible at art and was convinced that whatever she makes is going to look bad (thus deciding not to try). We reassured her that if she didn’t like what she made, that’s OK! We encouraged her to try anyways and let her know that all the Makers were there to experiment and ask/offer help to each other when we needed it. One of her friends made a design that she liked, and after asking her friend how she could get her paper to like her friend’s, she engaged more with the activity and stuck it out to the end, making her own custom design.

 

Legos have been a hit with our savvy Makers, and this week was no exception! Students dove into the bin, building airplanes, landscapes, houses, and cars.

20160414_155735

We had sets of TechBox Tricks out and tipped them off on how a simple circuit from the Techbox Tricks could power up and bring their Lego cars to life. You should see how hard they worked: Tinkering away, they were tried balancing battery packs in the vehicles and positioning a small motor to spin a car’s axles. Other vehicles ran on potential energy stored in a wound-up rubber band strung across the axles! Watch out, world. We’ve got some problem-solving, super motivated engineers coming your way in a few years!

20160414_16123920160414_160921

20160414_155714

 

 

It’s been a great year with these Makers. Every week, we’re impressed with how these students put their heads together and commit to making something. We’re proud of all the hard work they’ve put  in this year and hope they continue to be Makers in the future!

Floating On: Life Vests and Army Men

Recently, I came across some STEM activities by The Ardent Teacher. The “Designing Life Jackets for Babies” looked like a great activity for getting students to experiment and think critically about design. I adapted the activity so that we would use weighted plastic army men instead.

We posed the following challenge: Create a life jacket that will keep your army man face-up above the water with just a piece of foam and 2 small rubber bands.

Since the army men float easily on their won, we attached weights to them (nuts from the hardware store were $.05 each!) to make it more challenging to float.

IMG_4018

Despite attaching these weights, the students quickly found out how to keep their army men afloat. Anticipating this, we put different spins on the challenge:

  • Imagine that 2 army men must share one flotation device. How could you modify your flotation device so that both men could stay face-up above water?
  • In the real world, engineers face challenges all the time. Sometimes, you don’t have as much material as you’d like to create a design. But engineers find a way to make their designs work! Now, with half of the material you start with, create a life vest to keep 1 (or 2 if you want to challenge yourself!) army man afloat.
  • Imagine that your army man is parachuting out of the sky and will be landing in the water. With the materials given, design a flotation device such that when he’s dropped from 1 or 2 feet above the water, he is able to safely float to the surface and keep his head above the water.

IMG_4016 IMG_4013

These variations kept the students engaged and trying new things. Sometimes the army man floated face-down or barely stayed above water, and the students would try placing the foam on different areas of the army man to counter his weight and help him float upright.

To wind down, our students switched gears and worked with Little Bits and Rainbow Looms! 20160310_160429
IMG_4020

20160310_160532 

Images © 2015 Regents of the University of Michigan. Text available under Creative Commons Attribution-NonCommercial-ShareAlike license unless otherwise stated. This project was made possible in part by the Institute of​ ​Museum and Library Services RE-05-15-0021-15.